Looks like mi 09 xf was flooded a bit by rain, but it runs I can drive it, just screen is not working, showing nothing, no radio, no navi, hard buttons also not working, beeps when I drive, when I stop stops beeping, sometimes wipers start to work without reason, or when car is parked light go on, shows codes like dsc not available, abs fault1. 1. Open central locking system using the car key. 2. Get into the car and close all doors. 3. Using the car key, switch the ignition lock briefly to position "1" and then switch off again. (Please do this switching within 5 seconds or otherwise the system is not ready for initialization. 4.
Anonymous. 11 Answers. SOURCE: Central locking on my Hyundai Accent no longer works. u will have to replace the celenoid so it can work normally again or just remove the celenoid and the car wont have a shift lock any more, you can also bypass the lock by pressing on the small hole on the top left side of the shifter.. hope this helps ..01553 - Motor for Central Locking; Passenger Door (V57); Lock 012 - Electrical Fault in Circuit - Intermittent Freeze Frame: Fault Status: 00101100 Fault Priority: 3 Fault Frequency: 5 Reset counter: 126 Mileage: 69101 km Time Indication: 0 Date: 2023.14.30 Time: 18:43:49 00929 - Locking Module for Central Locking; Front Passenger Side (F221) central lock not working . Door latch and sjb both fault checking process . Door and dickey lock not working check and found front rhd side door latch fault
4. Press the lock button on the remote key. With the key in the 'On' position, press the fob's lock button and turn the key back to the 'Off' position. Repeat this process at least three times, ending the cycle with the key in the 'On' position.
ypNTl. 425 138 61 495 143 88 45 35 166